Centreboard Totally Explained

Everything about Centerboard totally explained

A centreboard is a retractable keel which pivots out of a slot in the hull of a sailboat, known as a centerboard trunk (US) or case. The pivoting ability allows the centreboard to be raised to operate in shallow waters, to move the center of lateral resistance to offset changes to the sailplan that move the center of effort aft and to reduce drag when the full area of the centreboard isn't needed or when removing the boat from the water as when trailering. A daggerboard is similar but slides vertically rather than pivoting.

Function

A centreboard is used to provide lift to counter the lateral force from the sails. This is required for sailboats to move in directions other than downwind, since the force of the sail is never closer than 90 degrees to the apparent wind. Since most sailboats are symmetric along their axis of motion, the lateral force can come from either side, which means that centreboards must use symmetric foil shapes so that'll operate with equal efficiency on either tack.

Design

The efficiency of a centreboard improves with increasing aspect ratio. A long narrow centreboard produces less drag than a short, wide one for a given amount of lift, resulting in a faster boat that can point closer into the wind. A pivoting centreboard can also be used to move the center of lateral resistance aft to match a change in sail plan such as furling or dropping the jib. A retracting centreboard is more complex than a fixed keel, and most take up space inside the hull of the boat that could otherwise be used for passenger accommodations. For this reason, it isn't uncommon to find boats with combination of shallow keel and centreboard. The keel provides the housing for the centreboard, moving it out of the hull, but only adds a small amount of draft to the boat. The centreboard can then be lowered in deeper waters to increase the amount of lift. Ballast is usually provided in the keel, keeping the centreboard lighter and easier to handle.
Centreboards are often ballasted. Ballasted centreboards are generally not locked in place when lowered; the mass of the ballast keeps them down. This also provides a measure of safety should the boat run aground—the force of impact will push the foil back into the centreboard trunk, rather than breaking it as might happen if the board were locked in place. The mass of a ballasted foil means that a system of pulleys may be required to allow the sailor to lift the foil, and a method of latching the board in the upward position is needed. A centerboard differs from a ballast keel in that centerboards don't contribute to the stability of the vessel; their purpose is to provide lateral resistance.

Further Information

Get more info on 'Centerboard'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://centreboard.totallyexplained.com">Centreboard Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.